Problem idetified:High Density Printing

White Plastisol for High Density

We had a big problem with white Highhdensity Plastisol.After printing it's found
printing getting cracked; Very crucial/terrible problem.

I was in a fix, what should i do? because the ink which is being used it's most
expensive from Sericol.I was not getting other way to solve the problem.My Boss asked
me to identify the problem; why it happened?I had no idea where from shold I start?

However, I made some sample (4pcs) with same white & other Inks which are given to
the floor for production, I printed on same Black fabric.Because I wanted to see ;
is there same problm again arise or not?.If problem arises again then I must say; my
color/ink has problem.And if not(problem not come); then I must say there's problem
during printing or production.

And after curing those 4 samples; I found no problem, cracking nothing, very smooth
and shiny effect which were not found in our production.The problem what's identified
after the printing;it was not cured properly with hand dryer.That's main problem.
Even some print found which had been cracked before sending into the Conveyor belt.
.i.e. bottom & top level dried but middle of the printing(High Density)it never cured
properly.